bonejoev Posted March 19, 2019 Author Share Posted March 19, 2019 (edited) I added the file FakePCIID_XHCIMux.kext to the USB boot drive's clover>Kext>other but nothing happened, I don't know if I should install the boot loader to the drive itself and add it there, I don't think is going to make a difference. what do you suggest, and thanks for the help, I've been dealing with this for over a week now, is driving me mad, the funny thing is that I have a laptop with the same specs that my wife uses and is running apple's latest and greatest os and for some reason I can't get this install to recognized the sata controller or have the laptop's screen working, right now I'm able to see it because I have a external monitor connected to it. this is what happens before the screen becomes garbled when booting from SATA https://mega.nz/#!0stRwIJK!qH9-CvE8uju8OmdqQBKi5bpz4TmGtc8-cVPLL5iy0yo https://mega.nz/#!wt0zTKaB!gkSTxY_gVGp-aic1PQBnXQGCWa_D04FKtnQrBqyHjIg Edited March 19, 2019 by bonejoev adding something else Quote Link to comment Share on other sites More sharing options...
bonejoev Posted March 19, 2019 Author Share Posted March 19, 2019 just to update, I've analyze the boot sequence, and I see something that says kext org.rehabman.driver.FakePCIID.XHCIMux - library kext org.rehabman.driver.fakepciid not found can't load kext org.rehabman.driver.fakepciid.xhcimux - failed to resolve library dependencies kext ort.rehabman.driver.fakepciid.xhcimux failed to load (0xdc0000e) failed to load kext org.rehabman.driver.fakepciid.xhcimux (error 0xdc00000e) Quote Link to comment Share on other sites More sharing options...
bonejoev Posted March 19, 2019 Author Share Posted March 19, 2019 thank you Jake lo, I just found this out about my HP ENVY Dv7 7250us https://h30434.www3.hp.com/t5/Notebooks-Archive-Read-Only/How-to-enable-AHCI-for-HP-ENVY-TouchSmart-m6-k015dx/m-p/3310507#M115130 it doesn't support AHCI instead with intel's RST software it runs the disks in RAID, dued to some technical issues. my question to you, for a situation like this is there a workaround to install Macos Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 19, 2019 Moderators Share Posted March 19, 2019 try adding this kext to kexts/Other SATA-RAID-unsupported.kext.zip for FakePCIID.XHCIMux.kext, you need FakePCIID.kext in the same directory Quote Link to comment Share on other sites More sharing options...
bonejoev Posted March 19, 2019 Author Share Posted March 19, 2019 when I placed the fakePCIID.kext and the sata-RAID-unsupported.kext in the folder and it it recognized the drive and I was able to install Mojave, but one problem still remain, the only way I can see what's being display is through a second monitor attached, when I go into display settings in control panel, I'm able to see both screen the built-in with the right resolution (1600 x 900) and the external TV, but nothing is being displayed in the actual built-in screen. Quote Link to comment Share on other sites More sharing options...
bonejoev Posted March 20, 2019 Author Share Posted March 20, 2019 reporting back..... screen is fixed, I was able to use a configHD40001600x900.plist that I found online, and the screen is visible, only 3 things that are not working are AUDIO CAMERA MIC BATTERY STATUS SCREEN BRIGHTNESS SLEEP ( IT GOES TO SLEEP, BUT WHEN WAKES UP, SCREEN STAYS BLACK) this is the audio codec info https://mega.nz/#!s1FHHILT!TZAnBUXAeqzHso9jy-VILCREBW4n5wyvTbMYuEv7NGg Thanks for the help Jake lo Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 20, 2019 Moderators Share Posted March 20, 2019 post debug file You need to find out what codec it has for the audio. Quote Link to comment Share on other sites More sharing options...
bonejoev Posted March 20, 2019 Author Share Posted March 20, 2019 this is my debug file https://mega.nz/#!EoNBUaqR!PhV7KjRsqpbHoRhKtcIFM-XmrXDsaL3hImT12nMOehI Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 20, 2019 Moderators Share Posted March 20, 2019 Not sure which Config you use to boot, but change Inject layout-id from 3 to 12 Add the 2 aml files to the Patched folder and kext to the Clover kext folder Should get you battery status, brightness control and maybe audio too BatteryBrightness.zip Quote Link to comment Share on other sites More sharing options...
bonejoev Posted March 20, 2019 Author Share Posted March 20, 2019 Thanks , I was able to get battery status, brightness control, but not audio or sleep, it goes to sleep fine but wakes up with black screen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.