razor7 Posted August 8, 2019 Share Posted August 8, 2019 Hi! I followed the guide here to create boot usb with mojave install app https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?tab=comments#comment-87342 Everything just fine but the installer hangs out at boot time at a very early stage I have attached my laptop system specs got with CPU Z Any advise is really appreciated. Thanks a lot! CPU-Z-LAP-DELL.txt.zip CLOVER.zip Quote Link to comment Share on other sites More sharing options...
eC//FrEaK Posted August 8, 2019 Share Posted August 8, 2019 You have to enable "KernelPM" in Clover Configurator. I have added it for you. Just replace your "config.plist" with the attached "config.plist" inside your CLOVER folder. config.plist.zip 1 Quote Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 8, 2019 Administrators Share Posted August 8, 2019 No, if only if were just that! There are many many mistakes and missing items with your Clover setup (config + kexts). Try the attached instead: CLOVER.zip Quote Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 8, 2019 Administrators Share Posted August 8, 2019 Readable details of specs are missing so here they are: Intel dual-core Kaby Lake-U/Y i7-7500U @2.70GHz (Turbo boost up to @3.5GHz) Intel HD Graphics 620 (PCI id 8086:5916) 15.6 built-in LCD Full HD @1920x1080 or HD @1366x768 ? 4GB DDR4-2400 Realtek RTL8101/2/6E Gigabit Ethernet (PCI id 10ec:8136) Qualcomm QCA9377 802.11ac Wireless LAN (PCI id 168c:0042) Audio ? USB ports ? Video outputs ? Card reader ? Webcam ? Note that the Qualcomm WLAN card is unsupported and will have to be replaced by a supported model or USB dongle. See our FAQ section. I recommend you lookup the other Inspiron 5570 threads in this section, many contains useful info + copies of Clover setups. You can use the forum Search facility if required. Quote Link to comment Share on other sites More sharing options...
razor7 Posted August 8, 2019 Author Share Posted August 8, 2019 @eC//FrEaK, Thanks for the time to answer! Quote Link to comment Share on other sites More sharing options...
razor7 Posted August 8, 2019 Author Share Posted August 8, 2019 Hi @Hervé! Full specs: Intel dual-core Kaby Lake-U/Y i7-7500U @2.70GHz (Turbo boost up to @3.5GHz) Intel HD Graphics 620 (PCI id 8086:5916) 15.6 built-in LCD HD @1366x768 4GB DDR4-2400 (Installed at slot B ) Realtek RTL8101/2/6E Gigabit Ethernet (PCI id 10ec:8136) Qualcomm QCA9377 802.11ac Wireless LAN (PCI id 168c:0042) Realtek Audio ALC3246 (PCI id 10ec:0256), also listed as Intel Sunrise Point-LP HD Audio (PCI id 8086:9D71) Intel Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) (PCI id 8086:9D2F) Video outputs: 1 x HDMI Realtek USB 2.0 RTS5129 Card Reader Controller (PCI id 0BDA:9D2F on windows looks like USB\VID_0BDA&PID_0129&REV_3960) Sunplus Innovation Technology Integrated_Webcam_HD (PCI id 1bcf:28c1on windows looks like USB\VID_1BCF&PID_28C1&REV_6505) Quote Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 8, 2019 Administrators Share Posted August 8, 2019 Ok, so: audio codec is ALC256 and should be supported by AppleALC and the relevant layout(s) Realtek RTS5129 may or may not be supported with Sinetek's kext (unfinished project) Sunplus Webcam will work OOB or not al all 1 Quote Link to comment Share on other sites More sharing options...
razor7 Posted August 9, 2019 Author Share Posted August 9, 2019 Hi! I tried your CLOVER folder but I'm getting a KP at USB boot. If I enable RAID in UEFI firmware I can boot USB but no devices found, if I enable AHCI, USB gets KP. Here's the video of the boot sequence hope this helps https://we.tl/t-k0SuPk1kNZ I can barely see the following: CS_RUNTIME for entitlement: com.apple.rootless.kext-secure-managementpanic(cpu 3 caller 0xffffff7f9db83b30): nvme: "Fatal error occured. CSTS=0x1 US[1]=0x0 US[0]=0xb1 VID/DID=0x25228086 FW Revision=K4110401\n"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/IONVMeFamily-387.270.1/IONVMeController.cpp:5334 The laptop comes with a M2 Intel Optane 16GB SSD (i'm planning to switch it wirh a standard M2 SSD 480GB WesternDigital), could this device cause the panic? I'm using Clover v2.5k r5033 Thanks a lot! CLOVER.zip Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 10, 2019 Moderators Share Posted August 10, 2019 Set BIOS to AHCI. Raid is not supported without additional kext. The error is due to NVMe driver. Try the WD. I had WD and it's working nicely. Quote Link to comment Share on other sites More sharing options...
razor7 Posted August 10, 2019 Author Share Posted August 10, 2019 Hi! Thanks a lot for the reply. My laptop is already on AHCI. What do you mean with WD? Should I disconnect the Intel Optane card until I get my WD drive? I’m looking for WDS480G2G0B will it work? Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.