Handicap88 Posted November 1, 2020 Share Posted November 1, 2020 I got this two models, and hope finally one will work.. I have modified CellPhoneHelper.kext according to the instructions. Detects WWAN card, but unfortunately I cannot connect to network (AERO2). Works fine on Windows. I've tried almost everything. Sun Nov 1 11:01:11 2020 : publish_entry SCDSet() failed: Success! Sun Nov 1 11:01:11 2020 : publish_entry SCDSet() failed: Success! Sun Nov 1 11:01:12 2020 : Apple Base Script.ccl Version 3.3 Sun Nov 1 11:01:12 2020 : CCLWrite : AT\13 Sun Nov 1 11:01:12 2020 : CCLMatched : OK\13\10 Sun Nov 1 11:01:12 2020 : Initializing device: AT&FE0Q0V1 Sun Nov 1 11:01:12 2020 : CCLWrite : AT&FE0Q0V1\13 Sun Nov 1 11:01:12 2020 : CCLMatched : OK\13\10 Sun Nov 1 11:01:12 2020 : Initializing PDP context: AT+CGDCONT=1,"IP","darmowy" Sun Nov 1 11:01:12 2020 : CCLWrite : AT+CGDCONT=1,"IP","darmowy"\13 Sun Nov 1 11:01:12 2020 : CCLMatched : OK\13\10 Sun Nov 1 11:01:12 2020 : Dialing: ATD*99***1# Sun Nov 1 11:01:12 2020 : CCLWrite : ATD*99***1#\13 Sun Nov 1 11:01:12 2020 : Waiting for connection Sun Nov 1 11:01:13 2020 : CCLMatched : CONNECT\13\10 Sun Nov 1 11:01:13 2020 : Connection established Sun Nov 1 11:01:16 2020 : CCLExit: 0 Sun Nov 1 11:01:16 2020 : Serial connection established. Sun Nov 1 11:01:16 2020 : using link 0 Sun Nov 1 11:01:16 2020 : Using interface ppp0 Sun Nov 1 11:01:16 2020 : Connect: ppp0 <--> /dev/cu.wwan Sun Nov 1 11:01:17 2020 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5c1512c0> <pcomp> <accomp>] Sun Nov 1 11:01:17 2020 : rcvd [LCP ConfReq id=0x3 <auth chap MD5> <accomp> <pcomp> <mru 1500> <asyncmap 0x0> <magic 0x8ff79742>] Sun Nov 1 11:01:17 2020 : No auth is possible Sun Nov 1 11:01:17 2020 : lcp_reqci: returning CONFREJ. Sun Nov 1 11:01:17 2020 : sent [LCP ConfRej id=0x3 <auth chap MD5>] Sun Nov 1 11:01:17 2020 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x5c1512c0> <pcomp> <accomp>] Sun Nov 1 11:01:17 2020 : rcvd [LCP ConfReq id=0x4 <accomp> <pcomp> <mru 1500> <asyncmap 0x0> <magic 0x8ff79742>] Sun Nov 1 11:01:17 2020 : lcp_reqci: returning CONFACK. Sun Nov 1 11:01:17 2020 : sent [LCP ConfAck id=0x4 <accomp> <pcomp> <mru 1500> <asyncmap 0x0> <magic 0x8ff79742>] Sun Nov 1 11:01:17 2020 : sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Sun Nov 1 11:01:17 2020 : sent [IPV6CP ConfReq id=0x1 <addr fe80::2ad2:44ff:fe6c:d20d>] Sun Nov 1 11:01:17 2020 : rcvd [LCP ProtRej id=0x1 80 57 01 01 00 0e 01 0a 2a d2 44 ff fe 6c d2 0d] Sun Nov 1 11:01:17 2020 : rcvd [LCP TermReq id=0x1] Sun Nov 1 11:01:17 2020 : LCP terminated by peer Sun Nov 1 11:01:17 2020 : sent [LCP TermAck id=0x1] Sun Nov 1 11:01:20 2020 : Connection terminated. Sun Nov 1 11:01:21 2020 : CCLWrite : +++ Sun Nov 1 11:01:29 2020 : CCLWrite : ATH\13 Sun Nov 1 11:01:29 2020 : CCLMatched : OK\13\10 Sun Nov 1 11:01:30 2020 : CCLWrite : AT&F\13 Sun Nov 1 11:01:30 2020 : CCLMatched : OK\13\10 Sun Nov 1 11:01:30 2020 : CCLExit: 0 Sun Nov 1 11:01:30 2020 : Serial link disconnected. Quote Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 2, 2020 Administrators Share Posted November 2, 2020 did you set PPP? last tab on your first picture Quote Link to comment Share on other sites More sharing options...
Handicap88 Posted November 5, 2020 Author Share Posted November 5, 2020 @Bronxteck Sorry for delay.. I tried Huawei MU736, but no luck. It's visible only as USB device.. Now I switched back to SonyEricsson, and can answer.. Yes I checked PPP option. It makes no difference. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.