MARINE911 Posted January 23, 2017 Share Posted January 23, 2017 I have Dell OptiPlex 990 Intel® Core i5-2400 CPU @ 3.10GHz with 4GB DDR3 RAM and TWO HDD first one is 1.5TB and 2nd for OS X is 160 GB and GRAPHIC S ARE chip type Intel® HD Graphics family Total available graphics memory 1428 MB I DOWNLOADED THE OSX YOSEMITE ZONE and restored it with TRANSMAC ON USB i ALLREADY sat ACHI MODE when i am boot from YOSEMITE.ZONE IT STUCKS AT HACINTOSH LOGO WITH PROGRESSING BAR PLZ GUYS HELP ME OUT THIS SITUATION I AM THANKFULL TO YOU Quote Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 23, 2017 Administrators Share Posted January 23, 2017 Intel i5-2400 CPU carries integrated HD 2000 graphics. OS X does not support Intel HD 2000 at all so Yosemite is probably hanging at attempts to intialize graphics. You can always boot in verbose mode to check that out. All in all, you'll have to install a supported discrete PCIe x16 card in that desktop (depending on model) or replace your Sandy Bridge CPU with Intel HD 3000 that's compatible with your Optiplex 990. Look up the Optiplex specs and the Intel Ark site (Intel i5 2400 Series, Intel desktop Sandy Bridge CPUs). With regards to a discrete PCIe x16 graphics card, the mini tower model supports full-height cards, the desktop and SFF models support only low-profile cards and the USFF model has no expansion slots other than a mini-PCIe slot for half-height cards (wlan), i.e. you can't add a graphics card. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.