flyingfishfinger Posted November 5, 2019 Share Posted November 5, 2019 Hi, I'd like to try and install OS X Mojave on my Thinkpad X210. This is a custom motherboard based on a i7-8650u CPU. I've attempted to follow this guide which has similar specs, but I get ACPI errors and a KP / boot loop when I try to boot the installer. As the ACPI tables seem to be extracted from a working / stock BIOS, can someone either provide some pointers for how to get the above working (requests for specs welcome), or how to go about getting correct ACPI tables? Cheers, Rafael EDIT: Full spes: - i7-8650u / UHD 620 - AMI BIOS 2.18.1236 - PS/2 trackpoint & keyboard - 16GB (2x8GB Samsung PC4-17000) - USB 3.0 xHCI - Samsung 850 EVO SSD - Conexant 20585 HD Audio - Realtek RTL8186/8111 ethernet - Broadcomm BCM4352 WiFi AC - UPEK fingerprint - Broadcomm BT 4 Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 6, 2019 Moderators Share Posted November 6, 2019 Boot to Clover, press F4 and then F2. Now connect the installer to a working system, mount the EFI partition. Compress and attach the Clover folder here We'll review the native DSDT/SSDT and create patches for your particular system Quote Link to comment Share on other sites More sharing options...
flyingfishfinger Posted November 6, 2019 Author Share Posted November 6, 2019 Hi- Thanks for the help! Please find the CLOVER folder attached. Cheers, Rafael CLOVER.zip Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 6, 2019 Moderators Share Posted November 6, 2019 Give this a try, goes into /EFI/Clover x210_test.zip Quote Link to comment Share on other sites More sharing options...
flyingfishfinger Posted November 6, 2019 Author Share Posted November 6, 2019 Hi- Tried it, no luck. I think there a still ACPI errors (they scroll by too fast for me to tell), but the thing that now gives a KP is: VoodooGPIOSunrisePointLP: Failed to get GPIO Controller Interrupt As far as I can tell. Screenshot attached, sorry if it's small. This is a 3K screen in a 12" laptop... R EDIT: If I run it with single user & safe mode, it stops here: Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 6, 2019 Moderators Share Posted November 6, 2019 strange, the files I attached does not have VoodooI2C nor Voodooi2CHID.kext in theme. Are you sure you're booting from the updated media? Quote Link to comment Share on other sites More sharing options...
flyingfishfinger Posted November 6, 2019 Author Share Posted November 6, 2019 Sorry, looks like I didn't copy it properly / merged instead of copying. Now it ends here, no KP just hangs (for the last 5 minutes or so at least): Safe mode , single user: Quote Link to comment Share on other sites More sharing options...
flyingfishfinger Posted November 11, 2019 Author Share Posted November 11, 2019 Hello, I hope all is well, I was wondering if you guys had any further ideas for this KP... Cheers, Rafael Quote Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 12, 2019 Moderators Share Posted November 12, 2019 can you try booting with boot arg? -igfxvesa Quote Link to comment Share on other sites More sharing options...
flyingfishfinger Posted November 12, 2019 Author Share Posted November 12, 2019 Ah, progress! It's much slower, but it does get to the installer screen. Mouse & keyboard don't work, but I didn't try USB ones yet. R Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.